2006 Honda Civic Lighten Crank Pulley

2006 Honda Civic Lighten Crank Pulley

Hey something new to share, my workshop has used my car as sample and come out with a lighten pulley for our ride, 2006 honda civic si or fd2.

This customize crank pulley come with 2 version!

First version same size as stock but reduce in weight to 500g.

Second version size reduce from 6″ to 5.5″ and weight is close to 500g too. For this version you need to change your belt!

Material Used

According to the manufacturer of these pulley, the material is aluminium t6,
For your information you can refer to here
http://en.wikipedia.org/wiki/6061_aluminum#6061-T6

6061-T6

T6 temper 6061 has an ultimate tensile strength of at least 42,000 psi (290 MPa) and yield strength of at least 35,000 psi (241 MPa). In thicknesses of 0.250 inch (6.35 mm) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%. T651 temper has similar mechanical properties.

Uses

6061 is widely used for construction of aircraft structures, such as wings and fuselages, more commonly in homebuilt aircraft than commercial or military aircraft. [2]

6061 is used for yacht construction, including small utility boats. [3]

6061 is commonly used in the construction of Bicycle Frames and components. The Cycling industry also uses 7005 and 7075 aluminium alloys.

Welding

6061 is highly weldable, using tungsten inert gas welding. Typically, after welding, the properties near the weld are those of 6061-0, a loss of strength of around 80%. The material can be re-heat-treated to restore -T4 or -T6 temper for the whole piece.

Extrusions

6061 is also an alloy used in the production of extrusions—long constant–cross-section structural shapes produced by pushing metal through a shaped

Filed Under: Civic FD2 Engine • Civic FD2 Performance Parts • My Honda Civic FD2 Modification